Skip to main content

EOS R1 firmware update 1.1.2

Canon has released a firmware update for its flagship camera, the EOS R1. This firmware (Version 1.1.2) includes fixes for the following issues identified in Version 1.1.0:

1. Fixes an issue where video could not be recorded correctly when using a memory card larger than 2TB with the [Pre-recording] setting enabled.
2. Fixes an issue where the camera failed to operate properly after updating to Firmware Version 1.1.0 if the still photo shooting/movie recording switch function was set to [Silent shutter function switching] or [Disable].

This firmware also incorporates the following changes introduced in Firmware Version 1.1.0:

1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and new firmware is made available on Canon servers.
3. Adds [Viewfinder Priority] mode, which activates the viewfinder when a user is detected by the rear sensor.
4. Adds the ability to automatically detect Flicker at 100 or 120 Hz during Live View display.
5. Adds the ability to register focus position as a presets on the CR-A100 Camera Remote Application. This ability makes it easier to focus on subjects at the intended distance when the application is used with Robotic Camera System CR-S700R.
6. Adds the ability to select [Panning Assist]. When users pan with compatible lenses, image stabilization and subject blur correction are applied during exposure.
7. Adds the ability to select [Case Special] to expand Servo AF characteristics which is effective for subjects located behind a net in sporting events, such as badminton or volleyball.
8. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
9. Adds a function that simultaneously protects images when they are rated.
10. Adds the ability to use up to 8TB of CFexpress cards.
Note
- Cards larger than 8TB require low-level formatting by the camera.
- Cards larger than 8TB are treated as 8TB cards.
- Cards larger than 2TB cannot be used for firmware updating.

11. Adds to lower the image capture frame rate to help prevent overheating when connected to CR-A100 in extended remote shooting.
12. When transferring images with voice memos via FTP, the transfer order priority has now changed with voice memo (Wav) file being sent first followed by image file.
If a voice memo is added to an image queued for transfer, the image and voice memo are now sent last.
13. Adds the ability to set the number of shots captured in pre-continuous shooting mode.
14. Adds the ability to set [Airplane mode] to shooting button customization.
15. Adds the ability to enable [Exposure Simulation] when a flash unit is attached.
16. Improved AF tracking during video capture for subjects that are difficult to focus on.
17. Fixes an issue in which Err70 may occur when enlarging an image after shooting with [Blackout-Free Display] set to "On" and [Servo 1st image priority/One-Shot AF release priority] set to "Release priority".
18. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
19. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
20. Fixes an issue in which Err70 may occur immediately after startup when shooting with the electronic shutter.
21. Fixes an issue in which Err70 may occur during video recording in "FHD239.8P/200.0P".
22. Fixes an issue in which Error 70 may occur while filming in video mode with frame rate set to "50.00P" and [Movie Digital IS] set to "On" or "Enhanced".
23. Fixes an issue in which Err70 may occur during shooting when both [Pre-recording] and [Auto send] to image.canon are set to "Enable".
24. Fixes an issue in which the camera may stop functioning properly when [Image Review] is set to "Off" and the monitor entered low brightness mode after pre-continuous shooting.
25. Fixes an issue in which video recording may not be possible when using Remote Live View shooting in EOS Utility while outputting via HDMI.
26. Fixes an issue in which large RAW image files may not be transferred via Camera Connect.
27. Fixes an issue in which the camera may not connect to Wi-Fi 7-compatible routers.

The firmware can be downloaded from https://www.canon.co.uk/support/
Labels:

Popular posts from this blog

Canon adds EOS R6 Mark III camera and RF 45mm f1.2 STM lens to R system line-up

  Today Canon unveils an exciting dual release: the powerful EOS R6 Mark III and innovative RF 45mm f1.2 STM prime lens – both designed for storytellers looking to elevate their creativity. EOS R6 Mark III camera The EOS R6 Mark III is a powerful 32.5MP stills camera with advanced filmmaking features, offering exceptional quality and control for photographers covering a range of subjects from sports and wildlife to weddings and portraits. Positioned above the EOS R6 Mark II, the EOS R6 Mark III offers significant upgrades in resolution, tracking and connectivity offering additional choice alongside the existing EOS R5 and EOS R6 models. It inherits a number of key features from recent cameras – most notably Register people priority, Register/recall AF settings and Pre-continuous shooting from the professional EOS R5 Mark II, plus Open Gate recording from the EOS C50. The R6 Mark III is an impressive upgrade to its predecessor, EOS R6 Mark II, with its all-new 32.5MP sensor, IBIS wi...
Read more

Canon teases new hybrid lenses

  Canon has announced its intention to add new lenses to its hybrid RF L-series range on 30 October 2024, teasing with the image above. Canon’s hybrid lenses are a range of RF L-series primes and zooms designed for high performance stills and video capture. They are able to perform multiple roles and harness technology from Canon’s broadcast, cinema and existing RF lenses to make for a truly versatile range. The first two lenses in the range are the RF 24-105mm f2.8L IS USM Z , launched in November 2023, and the RF 35mm f1.4L VCM lens , announced earlier this year in June. Keep an eye out as full details will be published as soon as they're available on 30 October 2024.
Read more

Canon announces forthcoming firmware updates

Canon has announced that there will shortly be firmware updates for a number of its EOS R-series mirrorless and PowerShot digital cameras. With this announcement, Canon reaffirms its commitment to continuous product innovation. The updates have been developed in response to real-world feedback from creators and photographers, and promise to deliver additional features and performance enhancements, helping customers get even more from the cameras they already own. In particular, the EOS R1 and EOS R5 Mark II will gain button customisation for pre-continuous shooting, following feedback from professional sports photographers, colour temperature memory for four K-values, while five of the range feature Wi-Fi and Bluetooth connection improvements to make 5GHz available to more applications, and many detailed improvements. All Canon EOS mirrorless cameras will gain improvements in usability and performance, though specific feature updates will vary according to each model. For example, ...
Read more